เครื่องวัดความแข็งของโลหะ รุ่น THL-370
สนใจติดต่อสอบถาม 02-1486393 สายด่วน 094-9413993 , 094-5146252
เครื่องวัดความแข็งโลหะ แบบพกพา
THL 370 Portable Hardness
เครื่องวัดความแข็งโลหะ แบบพกพา
Specifications
| Measuring range | HLD（170～960）HLD |
| Measuring direction | 360 drgree. |
| Hardness Scale | HL,HB,HRB,HRC,HRA,HV,HS |
| Display | 3 inch screen ,one of the biggest in China. |
| Data memory | 600 groups max.（relative to impact times 32～1） |
| Printing paper | width is （57.5±0.5）mm, diameter is 30mm |
| Battery pack | 7.4V Li-Battery |
| Battery charger | 9V/500mA |
| Continuous working period | about 150 hours（With backlight off, no printing） |
| Communication interface | USB2.0 |
| Outline dimensions | 225mm x 85mm x 35mm |
Advantages
- Largest screen 3 inch , showing all functions and parameters.it is the largest screen of leeb hardness tester in China , easy read and operate.
- The best impact device in China we offer ,stable, ageing resistance,through exam ,we can 2 years long time using ,but others can not.
- Test at any angle, even upside down.
- Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately.
- Seven impact devices are available for special application. Automatically identify the type of impact devices.
- Large capacity memory could store 600 groups (Relative to average times32～1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale etc.
- Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
- Battery information indicates the rest capacity of the battery and the charge status.
- User calibration function.
- USB port with the PC humanity multi-functions data proceeding software.
- Original imported high speed thermal printer support the immediate printing function. It can save data permanently.
- NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of no less than 200 hours (EL off and no printing).
- Auto power off to save energy.
- Excellent after-sale service system for high quality products-- -3 years’ guarantee and all life maintenance. Easy to buy and comfortable to use.
Main Application
- Die cavity of molds
- Bearings and other parts
- Failure analysis of pressure vessel, steam generator and other equipment
- Heavy work piece
- The installed machinery and permanently assembled parts
- Testing surface of a small hollow space
- Material identification in the warehouse of metallic materials
- Rapid testing in large range and multi-measuring areas for large-scale work piece
ราคา พิเศษ
